Nuclide reference

Ge-71 — Germanium-71

Ge-71 की half-life 11.43 d है। मुख्य decay mode: electron capture → Ga-71 (100%)।

Identification

तत्व
Germanium (Ge)
Atomic number Z
32
Mass number A
71
State
Radioactive

Key quantities

Half-life
11.43 d
विशिष्ट गतिविधि
5.953e+15 Bq/g
Gamma constant Γ
—
परिवहन के लिए A1 / A2 (SSR-6)
40 TBq / 40 TBq
D-value (НП-067-24)
1,000 TBq

Decay modes

  • electron capture → Ga-71 — 100 %

Main gamma lines

Energy, keVYield, %
9.252 · X-ray line25.78
9.225 · X-ray line13.26
10.266 · X-ray line3.275
10.262 · X-ray line1.676
1.09509 · X-ray line0.6444
1.13208 · X-ray line0.3994
10.37 · X-ray line0.01824

Lines of the bare nuclide (ENDF/B-VIII.0), without daughter ingrowth.

Related calculators

Reference data vs computed valuesHalf-life, gamma lines and D-value are reference data (ENDF/B-VIII.0, НП-067-24).Gamma constant Γ 1 m पर H*(10) है, ICRP-107 spectra (NIST µ_en/ρ, ICRP-74 Table A.21) से गणना की गई, equilibrium में short-lived progeny सहित (जैसे Cs-137/Ba-137m, Ra-226 series); specific activity molar mass M ≈ mass number A का उपयोग करती है।K-series X-ray energies are from NIST SRD 128 (Deslattes et al., 2003): in ENDF/B-VIII.0 they are given to 1 % and shifted by up to 0.7 keV for heavy elements. L-series lines and all yields are ENDF/B-VIII.0.

Germanium-71 (Ge-71) — reference data

What is in the card

This card gathers the key data of radionuclide Ge-71 in one place: half-life, decay modes, main gamma lines, alpha and beta particle energies, gamma constant, specific activity and the D-value for source categorization. Decay and emission data are from ENDF/B-VIII.0; the D-value follows NP-067-24; the gamma constant is the ambient dose equivalent H*(10) at 1 m, computed from ICRP-107 spectra.

How to use the data

Half-life and specific activity let you recalculate the activity of a Ge-71 source to the delivery or disposal date — use the decay calculator. Gamma lines with yields identify the nuclide from a spectrum and pick the line for gamma spectrometry; the gamma constant Γ gives the dose rate at a distance, while the D-value and A1/A2 set the source category and the package type for transport.