Nuclide reference

Sb-124 — Antimony-124

The half-life of Sb-124 is 60.2 d. Main decay mode: β⁻ decay to Te-124 (100%).

Identification

Element
Antimony (Sb)
Atomic number Z
51
Mass number A
124
State
Radioactive

Key quantities

Half-life
60.2 d
Specific activity
6.472e+14 Bq/g
Gamma constant Γ (H*(10))
0.2661 µSv·m²/(MBq·h)
Dose rate, 1 GBq at 1 m
≈ 266 µSv/h
A1 / A2 for transport (SSR-6, НП-053-16)
0.6 TBq / 0.6 TBq
D-value (НП-067-24)
0.04 TBq

Decay modes

  • β⁻ decay → Te-124 — 100 %

Main gamma lines

Energy, keVYield, %
602.72697.79
1,690.9747.57
722.78210.76
645.8527.42
2,090.935.486
1,368.162.624
713.7762.276
968.1951.882
1,045.131.833
1,325.51.58

Lines of the bare nuclide (ENDF/B-VIII.0), without daughter ingrowth.

Alpha and beta particles

RadiationEnergy, keVYield, %
β⁻, E max610.5951.24
2,301.623.2
210.628.75
1,578.84.88

For β⁻ the endpoint (maximum) energy of the spectrum is given. ENDF/B-VIII.0.

Related calculators

Reference data vs computed valuesHalf-life, gamma lines and D-value are reference data (ENDF/B-VIII.0, НП-067-24).Gamma constant Γ is H*(10) at 1 m computed from ICRP-107 spectra (NIST µ_en/ρ, ICRP-74 Table A.21) including short-lived progeny in equilibrium (e.g. Cs-137/Ba-137m, Ra-226 series); specific activity uses molar mass M ≈ mass number A.Dose rate example: point source, no shielding or scatter, Ḣ = Γ·A/r².

Antimony-124 (Sb-124) — reference data

What is in the card

This card gathers the key data of radionuclide Sb-124 in one place: half-life, decay modes, main gamma lines, alpha and beta particle energies, gamma constant, specific activity and the D-value for source categorization. Decay and emission data are from ENDF/B-VIII.0; the D-value follows NP-067-24; the gamma constant is the ambient dose equivalent H*(10) at 1 m, computed from ICRP-107 spectra.

How to use the data

Half-life and specific activity let you recalculate the activity of a Sb-124 source to the delivery or disposal date — use the decay calculator. Gamma lines with yields identify the nuclide from a spectrum and pick the line for gamma spectrometry; the gamma constant Γ gives the dose rate at a distance, while the D-value and A1/A2 set the source category and the package type for transport.