Nuclide reference

Mn-56 — Manganese-56

The half-life of Mn-56 is 2.5789 h. Main decay mode: β⁻ decay to Fe-56 (100%).

Identification

Element
Manganese (Mn)
Atomic number Z
25
Mass number A
56
State
Radioactive

Key quantities

Half-life
2.5789 h
Specific activity
8.029e+17 Bq/g
Gamma constant Γ
—
A1 / A2 for transport (SSR-6, НП-053-16)
0.3 TBq / 0.3 TBq
D-value (НП-067-24)
0.04 TBq

Decay modes

  • β⁻ decay → Fe-56 — 100 %

Main gamma lines

Energy, keVYield, %
846.75498.87
1,810.7227.19
2,113.0514.34
2,522.880.9887
2,657.450.6525
2,959.770.3065
3,369.60.1681
1,238.260.09887
1,037.820.03955
2,598.40.01879

Lines of the bare nuclide (ENDF/B-VIII.0), without daughter ingrowth.

Alpha and beta particles

RadiationEnergy, keVYield, %
β⁻, E max2,848.756.3
1,03827.9
735.6514.6
325.791.16

For β⁻ the endpoint (maximum) energy of the spectrum is given. ENDF/B-VIII.0.

Related calculators

Reference data vs computed valuesHalf-life, gamma lines and D-value are reference data (ENDF/B-VIII.0, НП-067-24).Gamma constant Γ is H*(10) at 1 m computed from ICRP-107 spectra (NIST µ_en/ρ, ICRP-74 Table A.21) including short-lived progeny in equilibrium (e.g. Cs-137/Ba-137m, Ra-226 series); specific activity uses molar mass M ≈ mass number A.

Manganese-56 (Mn-56) — reference data

What is in the card

This card gathers the key data of radionuclide Mn-56 in one place: half-life, decay modes, main gamma lines, alpha and beta particle energies, gamma constant, specific activity and the D-value for source categorization. Decay and emission data are from ENDF/B-VIII.0; the D-value follows NP-067-24; the gamma constant is the ambient dose equivalent H*(10) at 1 m, computed from ICRP-107 spectra.

How to use the data

Half-life and specific activity let you recalculate the activity of a Mn-56 source to the delivery or disposal date — use the decay calculator. Gamma lines with yields identify the nuclide from a spectrum and pick the line for gamma spectrometry; the gamma constant Γ gives the dose rate at a distance, while the D-value and A1/A2 set the source category and the package type for transport.