Nuclide reference

Hf-175 — Hafnium-175

The half-life of Hf-175 is 70 d. Main decay mode: electron capture to Lu-175 (100%).

Identification

Element
Hafnium (Hf)
Atomic number Z
72
Mass number A
175
State
Radioactive

Key quantities

Half-life
70 d
Specific activity
3.944e+14 Bq/g
Gamma constant Γ
—
A1 / A2 for transport (SSR-6, НП-053-16)
3 TBq / 3 TBq
D-value (НП-067-24)
0.2 TBq

Decay modes

  • electron capture → Lu-175 — 100 %

Main gamma lines

Energy, keVYield, %
343.484
54.07 · X-ray line47.03
52.965 · X-ray line26.78
89.362.402
4331.436
229.60.6829
113.810.294
353.30.2285
318.90.168
161.30.02268

Lines of the bare nuclide (ENDF/B-VIII.0), without daughter ingrowth.

Related calculators

Reference data vs computed valuesHalf-life, gamma lines and D-value are reference data (ENDF/B-VIII.0, НП-067-24).Gamma constant Γ is H*(10) at 1 m computed from ICRP-107 spectra (NIST µ_en/ρ, ICRP-74 Table A.21) including short-lived progeny in equilibrium (e.g. Cs-137/Ba-137m, Ra-226 series); specific activity uses molar mass M ≈ mass number A.K-series X-ray energies are from NIST SRD 128 (Deslattes et al., 2003): in ENDF/B-VIII.0 they are given to 1 % and shifted by up to 0.7 keV for heavy elements. L-series lines and all yields are ENDF/B-VIII.0.

Hafnium-175 (Hf-175) — reference data

What is in the card

This card gathers the key data of radionuclide Hf-175 in one place: half-life, decay modes, main gamma lines, alpha and beta particle energies, gamma constant, specific activity and the D-value for source categorization. Decay and emission data are from ENDF/B-VIII.0; the D-value follows NP-067-24; the gamma constant is the ambient dose equivalent H*(10) at 1 m, computed from ICRP-107 spectra.

How to use the data

Half-life and specific activity let you recalculate the activity of a Hf-175 source to the delivery or disposal date — use the decay calculator. Gamma lines with yields identify the nuclide from a spectrum and pick the line for gamma spectrometry; the gamma constant Γ gives the dose rate at a distance, while the D-value and A1/A2 set the source category and the package type for transport.